Desk Mount Adapter - TMW Throttle - User Manual

Modified on Tue, 7 Nov, 2023 at 12:02 PM

What's in the Box:

  • 1 x TMW pad 



  • 1 x Adapter

  • 2 x Screw  DIN 965 M3x10 A2
  • 2 x Nut DIN 985 M3 A2
  • 4 x Screw  DIN 912 M5x12 A2
  • 4 x Nut DIN 934 M5 A2

VPC Desk Mount Adapter - TMW Throttle installation

Tools required:

  • 8 mm Wrench (NOT INCLUDED)
  • 10 mm Wrench (NOT INCLUDED)
  • H3 Hex Key (NOT INCLUDED)
  • H5 Hex Key (NOT INCLUDED)

     

1. Unscrew the highlighted bolts on your Desk Mount and set the adapter to the desired height.  

2. Fix the adapter into place with the same bolts and nuts.  

3. Set a TMW pad on the adapter.

4. Fix the pad with the screws M3x10 and nuts M3.


5. Using the highlighted bolt holes secure your TMW Throttle with the remaining screws and nuts.


Troubleshooting


Please visit the VIRPIL Controls support portal for troubleshooting advice. If you are still experiencing issues or unable to find answers to your specific question, please create a ticket on our support portal!


https://support.virpil.com

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article