VPC Cadet Configurator Version: [20241226]

VPC Cadet Configurator V20241226:

What has been added to the new version?

1. OUT/AUX functionality added.
2. Added panels and “VPC ACE Torq Rudder Pedals”
3. Added functionality for settings up axis curves smoothing.

The “VPC Cadet Configurator” software allows updating the device firmware, as well as calibrating

sensors and configuring device parameters.

Key points you need to know in order to work properly with the configurator:

1. The current version of the configurator supports only the following devices:

“VPC CDT-VMAX Throttle”,

“VPC Control Panel #1”,

“VPC Control Panel #2”,

“VPC Control Panel #3”,

“VPC SharKa-50 Control Panel”,

“VPC ACE Torq Rudder Pedals”

2. The firmware version of the device and the configurator software version must match, the

version is displayed in the “Firmware” section. If the device and software versions do not match,

only the display of the 3D model of the device and the firmware update procedure are allowed.

3. Select a device from the list on the left to start the setup.

4. Once the setup or calibration is complete, you must save the profile to the device using the

“Apply profile” button.