WarBRD Rudder Pedals - User Manual

Modified on Tue, 07 Nov 2023 at 12:00 PM

Package Contents

  • 1 x Rudder Pedals Assembly

  • 2 x Footplates

  • 2 x Soft Center Cams

  • 2 x Hard Center Cams

  • 1 x Standard Spring (Preinstalled)
  • 1 x Strong Spring

Attaching the Footplates

Tools required:

  • 7 mm Wrench (NOT INCLUDED)

  • H2.5 Hex Key (NOT INCLUDED)

1. Remove the highlighted nuts and bolts from both the left and right foot sides of the pedal assembly. 

2. Each footplate has multiple mounting holes so that the total width between the feet can be set to personal preference.

Changing Cams & Springs

Tools required:

  • 10 mm Wrench (NOT INCLUDED)

1. Remove the centering spring from the cam arms using round nose pliers.

2. Unscrew the highlighted nuts holding the cams onto the pedal assembly. 3. Remove the cams and replace with your desired set.

4. The cam centering springs can be configured in these positions as follows; 

Standard Spring

Strong Spring

Standard + Stiff Spring

Hardmounting the Rudder Pedals

Tools required:

  • 8 mm Wrench (NOT INCLUDED)


1. Unscrew the highlighted nuts.

2.  The rudder pedals body can now be lifted from the legs and hardmounted using the same bolt holes. 


Please visit the VIRPIL Controls support portal for troubleshooting advice. If you are still experiencing issues or unable to find answers to your specific question, please create a ticket on our support portal!


Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select atleast one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article